Installing And Removing The Hard Disk Drive; Removing A Hard Disk Drive - Fujitsu ESPRIMO P556 Operating Manual

System expansions

Installing and removing the hard disk drive

Harddiskdrive, Harddiskdrive, Harddiskdrive,

Removing a hard disk drive

► Open the casing (see
Harddisk drive,
► Remove all connected cables (data cable, power supply) from the drive.
► Undo the screws (1) and gently press against the hard disk drive from underneath.
► Pull the drive backwards a short way out of the bay in the direction of the arrow (2).
The drive now protrudes slightly out of the bay.
► Pull the drive completely out of its bay. Make sure that you are not touching other components.
► If necessary, make the required settings on the remaining hard disk drive.
► Close the casing (see
It may be necessary to modify the entry for the remaining drives in the BIOS Setup.
You will need a SATA cable to install a second hard disk on the listed device variants.
36
"Opening the casing", Page
"Closing the casing", Page
30).
1
1
1
1
31).
Fujitsu