Attaching The Cover; Installing And Removing The Hard Disk Drive; Installing A Hard Disk Drive - Fujitsu ESPRIMO K55x/24 Series Operating Manual

Attaching the cover

► Place the cover (1) in its installation opening with a slight twisting movement (2).

The cover must hook into place.
Take care not to trap any cables when fitting the cover.
► Fasten the cover in place with the screw (3).
► Re-fasten the service cover (see

Installing and removing the hard disk drive

The following information applies to FUJITSU ESPRIMO K557/K558 only

Installing a hard disk drive

► Remove the service cover (see
Fujitsu
3
2
1 1
"Mounting the service cover", Page
"Removing the service cover", Page
System expansions
51)
49).
55