Figure 91. Removing a 2.5-inch hard drive blank
a. hard drive blank
b. release button
Related references
Safety instructions
on page 67
Related tasks
Removing the optional front bezel
Installing the optional front bezel
Installing a 2.5-inch hard drive blank
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. If installed, remove the front bezel.
Steps
Insert the hard drive blank into the hard drive slot until the release button clicks into place.
Figure 92. Installing a 2.5-inch hard drive blank
a. hard drive blank
Next steps
If removed, install the front bezel.
Related references
Safety instructions
on page 67
160
Installing and removing system components
on page 69
on page 70