Removing And Installing The Hook Compartment Cover - Dürkopp Adler 967 Service Instructions Manual

Removing the thread tension plate
1. First remove the upper right cover (1).
2. Loosen the screws (2).
3. Remove the thread tension plate (3).

3.3.7 Removing and installing the hook compartment cover

Figure 7: Removing the hook compartment cover
(1) - Cover
(2) - Opening
(3) - Cover
Removing the hook compartment cover
1. Insert a finger into the opening (2).
2. Push the cover (1) up.
3. Applying moderate force, pull the cover (3) off upwards the
4. Loosen the screws (4).
5. Remove the plate (5).
14
The thread tension plate is connected to cables and hoses which are
attached under the upper right cover. This cover therefore must be
removed.
(the cover is secured with a permanent magnet).
Working basis
(4) - Screws
(5) - Plate
Service instructions 967 - 00.0 - 12/2014