Removing The Covers; Access To The Machine Bottom Section - Dürkopp Adler 967 Service Instructions Manual

3.3 Removing the covers

In many types of setting work, you will have to remove the machine covers
first in order to access the components.
Described here is how to remove the individual covers and how to refit
them. Just the cover that needs to be removed is then specified in the text
for that particular type of setting work.

3.3.1 Access to the machine bottom section

In order to access the components at the machine bottom section, you
must first tilt the machine upper section.
Figure 1: Tilting and erecting the machine upper section
Tilting the upper machine section
1. Tilt the machine upper section as far as it will go.
Erecting the machine upper section
1. Erecting the machine upper section
10
WARNING
Risk of injury
Crushing by moving parts
Switch the sewing machine off before you remove the covers
or refit them.
Working basis
Service instructions 967 - 00.0 - 12/2014