Safety; Basic Safety Instructions - Dürkopp Adler 967 Service Instructions Manual

Safety

2
This section contains basic information for your safety.
Read the information carefully before setting up, programming, maintain-
ing, or operating the machine.
Make sure to follow the information included in this section. Failure to do
so can result in serious injury and damage to the machine.

2.1 Basic safety instructions

Only authorized personnel should use the machine. Anyone working on
the machine should read the operating manual first.
The machine should only be set up in accordance with the manual.
The operating manual should be available at the machine's location at all
times.
Observe the generally applicable safety and accident prevention regula-
tions and the legal regulations concerning industrial safety and environ-
mental protection.
If you use parts from suppliers, observe the safety information and oper-
ating manual provided by the manufacturer.
All warnings on the machine must always be in legible condition and may
not be removed. Missing or damaged labels should be replaced immedi-
ately.
In the following situations, the machine must be disconnected from the
power supply using the main switch or by disconnecting the power plug:
• Threading
• Replacing the needle or other sewing tools
• Leaving the workplace
• Performing service, maintenance work and repairs
Inspect the machine while in use for any externally visible damage. Stop
working as soon as you notice any changes to the machine. Report any
changes to your supervisor. A damaged machine may no longer be used.
Machines or machine parts that have reached the end of their service life
must not continue to be used. They have to be disposed of correctly and
in accordance with the applicable statutory provisions.
Only qualified specialists may set up the machine. Anyone setting up the
machine should read the operating manual first.
Service instructions 967 - 00.0 - 12/2014
Safety
5