Removing And Placing The Toothed Belt Cover - Dürkopp Adler 195 Service Instructions Manual

3.8.6 Removing and placing the toothed belt cover

Fig. 17: Removing and placing the toothed belt cover
(1) - Toothed belt cover
(2) - Handwheel
Removing the toothed belt cover
To remove the toothed belt cover:
1. Remove the handwheel (2) ( p. 29).
2. Loosen the 5 screws (3).
3. Remove toothed belt cover (1).
Placing the toothed belt cover
To place the toothed belt cover:
1. Carefully place the toothed belt cover (1) without crushing, kinking or
2. Tighten the 5 screws (3).
3. Place the handwheel (2) ( p. 29).
28
NOTICE
Property damage may occur!
Damage to cables by crushing, kinking or pinching.
Place the toothed belt cover without crushing, kinking or pinching
any cables.
①
②
③
pinching any cables.
(3) - Screw
Service Instructions 195 - 00.0 - 12/2017
Working basis
③