Data Extraction Utility - Pentek Talon RTX 2767 Operating Manual

Page 76
10.6

Data Extraction Utility

The Data Extraction Utility
from your recording. This utility allows you to mark a starting point and an ending
point in the original recording and copy that data to a new file. In addition to the
extracted data, the new file will include the same header information as the original
recording.
To use the Data Extraction Utility, move the file position in the Playback Controls
(Figure 10−11) to the start position of the section you want to copy.
After you set the start position, click the Start Marker button on the Data Extraction
Utility (Figure
of the section you want to copy. Click the Stop Marker button on the Data Extraction
Utility to set the end position.
To select a name for the data extraction file, click on the folder browse button (folder
icon) on the Data Extraction Utility and enter a file name.
To begin data extraction, click the Start button. The file extraction's progress will be
indicated as the MBs field increments throughout the transfer. This will stop once the
file transfer is complete. If you wish to manually stop the transfer at any time, click the
Stop button.
Rev.: 1.0
(Figure 10−12) enables you to extract sections of interest
Figure 10−11: Playback Controls
10−12). Next, move the file position in the Playback Controls to the end
Figure 10−12: Data Extraction Utility
Talon RTX 2767 Operating Manual