Table of Contents
Advertisement
Talon RTX 2767 Operating Manual
8.3
Master Play Controls (continued)
8.3.4
8.3.5
8.3.6
8.3.7
8.3.8
Play by Time − Master Playback
For time−length master playback, set the Transfer Time numeric entry field
to the number of seconds desired for master playback. After the playback
starts, playback of all master−controlled channels will automatically stop
after the elapsed time specified.
NOTE:
The minimum play time is 1 millisecond. If play time exceeds file
size, playback stops at the end of the file.
Master Status
The master play Status field will display Stopped or Playing, reflecting the
current master playback operating mode.
Master Data Loss
The Data Loss indicator will light up red if data in any of the master play−
back channels is not played back successfully from a file. This can happen if
the recording is corrupted, or for other reasons.
If the Data Loss indicator is not lit, then all of the data for all master play−
back channels was played back successfully.
Master Current Position (Secs)
The Current Position indicator shows the current playback position within
the file in seconds. When playback is stopped manually or automatically,
this field displays the total duration of the file.
File Viewer
The File Viewer button selects the File Viewer for displaying the signals
after recording. See
Chapter 10
for more details.
Page 55
Rev.: 1.0
Advertisement
Table of Contents
