Table of Contents
Advertisement
Talon RTX 2767 Operating Manual
9.3
Input Controls
This section described the controls that enable you to adjust the input.
9.3.1
9.3.2
9.3.3
Resume, Pause and Close
When started, the Signal Viewer begins displaying live data. Clicking on the
Pause button in the lower left stops the live display and clicking Resume
restarts it. The Signal Viewer is closed by clicking the Close button.
Figure 9−7: Resume, Pause and Close Buttons
Channel Index and Board Index
The Channel Index up/down buttons
screen allow you to select a port or channel for signal viewing. Each port or
channel in your system is assigned a number, which is shown on the Talon
system's main configuration screen
If your system uses more than one board, the Board Index up/down but−
tons
(Figure
9−8) allow you to select the board that is generating the signals
you want to view. The Board Index number is the last digit shown on the
board tab shown on the channel configuration panel on the main configura−
tion screen (see
Figure
Figure 9−8: Channel Index and Board Index
FFT Size
By clicking on the FFT size input field you will be able to choose from sev−
eral specified values, ranging from 128 to 64K.
Figure 9−9: FFT Size
(Figure
(Figure
5−1).
5−1).
Page 61
9−8) in the lower left of the
Rev.: 1.0
Advertisement
Table of Contents
