Talon RTX 2767 Operating Manual
6.3
Master Record Controls
The master controls for recording are located at the top of the Record screen
3). These controls allow simultaneous multi−channel recording.
The Master Record checkboxes in the channel controls section at the bottom of the
Record screen
ing.
Channels can be selected for master recording by clicking on the Master Record box to
show a check mark. Channels can be de−selected from master recording by clicking on
the box to remove the check mark.
All of the channels selected for master recording are controlled by the setting in the
master controls section at the top of the Record screen.
6.3.1
6.3.2
6.3.3
(Figure
6−1) allow you to select or deselect channels for master record−
Figure 6−3: Record Screen − Master Controls
Master Record Button
The master recording can be manually started for all selected channels by
clicking the Master Record button.
Master Stop Button
The master recording can be manually stopped for all selected channels by
clicking the Master Stop button.
Record Until Stop − Master Recording
You can choose to master record all selected channels until you manually
press the Stop button by entering a file transfer length of 0 in the Transfer
Time field.
NOTE:
If you don't manually press Stop, recording will stop automati−
cally when the disk is filled.
Page 41
(Figure 6−
Rev.: 1.0