Configuring Output Channel Parameters - Pentek Talon RTX 2767 Operating Manual

Talon RTX 2767 Operating Manual
5.7 Configuring the Talon System Using the Configuration Panel (continued)
5.7.4
Figure 5−8: Output Channel Parameters Configuration Screen

Configuring Output Channel Parameters

NOTE: You must always configure the clock parameters before you
configure the output channel parameters.
The output channel parameters are configured by clicking on the Configure
button adjacent to the output channel located on the board tab. A configura−
tion screen appears that enables you to set the parameters as follows:
• Pull−down selections are implemented with an arrow next to the
parameter window.
• User entry fields allow numeric data entry.
• Grayed−out fields are unavailable for change or data entry because of
other configuration selections.
Details about each field on this screen are provided in
Page 31
Table 5−3.
Rev.: 1.0