Figure 9−3: Amplitude Switch (Time Display) - Pentek Talon RTX 2767 Operating Manual

Talon RTX 2767 Operating Manual
9.2 Signal Viewer Displays (continued)
On the left side of the Time window is an Amplitude switch
you to toggle the amplitude scaling between Volts and % of Full Scale. Click on the
switch to change its position/setting.
At the top of the Time window is a Display Type switch
Type switch allows you to toggle the left−side Signal Viewer window between the
Time display and the Frequency − Time − Intensity display. Click on the switch to
change its position/setting.
Figure 9−1
Figure 9−5
the left window.
Figure 9−3: Amplitude Switch (Time Display)
Figure 9−4: Display Type Switch
shows the Signal Viewer with the Time display in the left window and
shows the Signal Viewer with the Frequency − Time − Intensity display in
Page 59
(Figure 9−3) that allows
(Figure 9−4). The Display
Rev.: 1.0