Talon RTX 2767 Operating Manual
Chapter 6: Recording a Signal
This chapter describes how to record a signal with the Talon system:
•
Section 6.1
•
Section 6.2
•
Section 6.3
6.1
The Record Screen
Select the Record screen by clicking on the Record tab along the top of the GUI.
6−1
shows an example of the Record screen. The available channels are shown in the
Channel column on the bottom left of the screen. The Record screen configures the
recording modes, length of recording, and file names.
The top section of the Record screen allows you to record multiple channels
simultaneously and the bottom section allows you to record a single channel.
describes the Record screen.
describes the record channel controls.
describes the master record controls.
Figure 6−1: Record Screen
Page 35
Figure
Rev.: 1.0