Page 26
5.7
Configuring the Talon System Using the Configuration Panel
This section describes how to configure the Talon system using the configuration panel,
which allows you to access configuration screens for each channel and the clock. You
can also configure the Talon system using a profile, as described in
5.7.1
Rev.: 1.0
Configuration Panel
The lower left section of the Configure screen presents the configuration
panel as shown in
Figure 5−5
corresponds to a Pentek board in the system.
Figure 5−5: Configuration Panel
Clicking the Configure button produces a configuration screen, allowing
you to set parameters.
Talon RTX 2767 Operating Manual
below. Each tab with a board model number
Section
5.6.