Table of Contents
Advertisement
Page 58
9.2
Signal Viewer Displays and Display Controls
The Signal Viewer presents two display windows: the Time window on the left and the
Frequency Magnitude window on the right as shown in
At the bottom of the Time window is a Samples switch that allows you to select
between samples and time
Click on the switch to change its position/setting. When the switch is set to Samples,
the X−axis is scaled to show the signal in terms of the number of samples. When
switched to Time, the X−axis is scaled to show the signal in terms of time in seconds.
Rev.: 1.0
Figure 9−1: Signal Viewer (Default Display)
(Figure
9−2).
Figure 9−2: Samples/Time Switch
Talon RTX 2767 Operating Manual
Figure
9−1.
Advertisement
Table of Contents
