Configuring Input Channel Parameters - Pentek Talon RTX 2767 Operating Manual

Talon RTX 2767 Operating Manual
5.7 Configuring the Talon System Using the Configuration Panel (continued)
5.7.3
Figure 5−7: Example of Input Channel Parameters Configuration Screen

Configuring Input Channel Parameters

NOTE: You must always configure the clock parameters before you
configure the channel parameters.
The channel parameters are configured by clicking on the Configure button
adjacent to each channel shown on the 786xx board tab. A channel parame−
ters screen (Figure 5−7) appears that enables you to set parameters as fol−
lows:
• Downconversion checkbox (checked or unchecked) determines whether
you are configuring the ADC (unchecked) or the DDC (checked).
• Pull−down selections are implemented with an arrow next to the
parameter window.
• User entry fields allow numeric data entry.
• Grayed−out fields are unavailable for change or data entry because of
other configuration selections.
Details about each field on this screen are provided in
Page 29
Table 5−2.
Rev.: 1.0