Table of Contents
Advertisement
Talon RTX 2767 Operating Manual
6.2
Record Channel Controls (continued)
6.2.7
6.2.8
6.2.9
6.2.10
6.2.11
6.2.12
Master Record
The Master Record checkboxes allow you to select multiple channels to be
recorded simultaneously. Click on the box for each channel you want to
record so that it shows a check mark. To de−select a channel from Master
Recording, click on the box to remove the check mark. See
details.
Record Button
The recording can be manually started for each channel by clicking its
Record button.
Stop Button
The recording can be manually stopped for each channel by clicking its Stop
button.
Status
The Status column will display Stopped or Recording, reflecting the current
operating mode.
Channel Position (MSs)
The current recording position within the file is shown in megasamples in
the Channel Position column. When the recording is stopped manually or
automatically, this field displays the last position of the recording.
Data Rate (MS/s)
During recording, the current recording data rate in megasamples per sec−
ond is shown in the Data Rate column. When the recording is stopped man−
ually or automatically, this field displays the recording rate for the
completed recording.
Page 39
Section 6.3
for
Rev.: 1.0
Advertisement
Table of Contents
