Table of Contents
Advertisement
Talon RTX 2767 Operating Manual
8.2
Play Channel Controls (continued)
8.2.4
8.2.5
8.2.6
Play by Time
For time length playback, set the units selection menu to Secs (seconds).
(This menu is to the right of the numeric entry field in the Transfer Length
column). Then specify the number of seconds for the playback using the
numeric entry field under Transfer Length.
This entry accepts a floating point value, allowing you to specify resolutions
smaller than 1 second. After the playback starts, it will automatically stop
after the elapsed time specified.
NOTE:
The minimum play time is 1 millisecond. If the number of MSs
represents a play time of under 1 millisecond, you will be
prompted accordingly. If play time exceeds the file size, playback
will stop at the end of the file.
Play by File Size
For file size length playback, set the units selection menu to MSs (Megasam−
ples). (This menu is to the right of the numeric entry field in the Transfer
Length column). Then specify the number of Megasamples for the playback
using the numeric entry window under Transfer Length. After the playback
starts, it will automatically stop after the file size reaches the specified limit.
NOTE:
The minimum play time is 1 millisecond. If the number of MSs
represents a play time of under 1 millisecond, you will be
prompted accordingly. If play time exceeds the file size, playback
will stop at the end of the file.
Loop
If the Loop box is unchecked, files will be played back for the requested
amount of time or length and then playback will stop. If the Loop box is
checked, files will be played back repeatedly, looping back to the Start Posi−
tion after the requested transfer time or length. The Loop box is toggled
between checked and unchecked by clicking on it with the mouse.
Loop must be selected before beginning the playback. If the Loop box is
checked and then the playback begins, it cannot be unchecked during play−
back, and vice−versa.
Page 51
Rev.: 1.0
Advertisement
Table of Contents
