Table of Contents
Advertisement
Page 70
10.4
Display and Playback Controls
After you select a file to view, the File Viewer presents two display windows: the Time
window on the left and the Frequency Magnitude window on the right, as shown in
Figure
10−3.
At the bottom of the Time window is a switch that allows you to select between sam−
ples and time. When the switch is set to Samples, the X−axis is scaled to show the sig−
nal in terms of the number of samples. When switched to Time, the X−axis is scaled to
show the signal in terms of time in seconds.
10.4.1
10.4.2
Rev.: 1.0
Figure 10−3: Example of File Viewer
Display Controls
The File Viewer has various controls that allow you to adjust the display.
These are described in
Playback Controls
When started, the File Viewer waits for you to click the Play button on the
lower left side of the screen to start the display. Clicking on the Pause button
stops the file display and clicking Play restarts it. The File Viewer is closed
by clicking the Quit button. See
Talon RTX 2767 Operating Manual
Chapter
11.
Figure
10−4.
Advertisement
Table of Contents
