Table of Contents
Advertisement
Page 18
4.4
Boot−Up Sequence
The following sequence of events will occur during a normal boot−up sequence.
1) Windows 7 will boot completely.
2) Windows Desktop should appear.
3) The Talon system Server will launch automatically in a DOS window.
4) To launch the Talon recording system GUI client, double−click on the Talon "client"
icon.
4.5
Maintenance
When working on or cleaning the Talon recording system, always use a clean, flat
working surface area. Although the unit requires little maintenance, all the components
must be handled with care and according to its specifications.
Rev.: 2.1
NOTE:
The GUI takes a few seconds to launch initially. Please wait.
NOTE:
Do not disable the Windows networking interface. The Talon
system's software uses the Windows networking interface as part
of the node−locking mechanism. If the Windows networking
interface is disabled, the server software will not pass the node−
lock check.
Talon RTR 2747 Operating Manual
Advertisement
Table of Contents
