Dns Configuration - NETGEAR XS728T ProSAFE Software Administration Manual

Note: For both US and EU recurring time ranges, add the settings of offset
and zone (just like for recurring time ranges).
• Non Recurring. Summer time settings are in effect only between the start date and
end date of the specified year. When this mode is selected, the summer time settings
do not repeat on an annual basis.
3. If the selected summer time mode is Recurring or Non Recurring, set the start and end
times for the time shift:
• Begins At. From the appropriate lists, select the date and time on which summer time
begins.
• Ends At. From the appropriate lists, select the date and time on which summer time
ends.
4. In the Offset field, specify the number of minutes to shift the summer time from the standard
time. The default time shift is 60 minutes.
5. In the Zone field, specify the acronym associated with the time zone when summer time is
in effect.
This field is not validated against an official list of time zone acronyms.
6. Click the Apply button.
The DayLight Saving (DST) Status table shows information about the DST time settings
and whether the time shift for summer time is currently in effect. The DayLight Saving (DST)
displays whether DST is enabled; DayLight Saving (DST) in Effect displays whether is
actually in effect.
DNS
Use the DNS screens to configure information about DNS servers used by the network and
DNS client settings for the switch.
From the DNS menu, you can access features described in the following sections:
•

DNS Configuration

• Host Configuration
DNS Configuration
Use this screen to configure global DNS settings and DNS server information.
To configure the global DNS settings:

1. Select System > Management > DNS > DNS Configuration.
2. Specify whether to enable or disable the administrative status of the DNS client.
• Enable. Allow the switch to send DNS queries to a DNS server to resolve a DNS
domain name. The DNS is enabled by default.
XS728T ProSAFE 28-Port 10-Gigabit L2+ Smart Switch
System
25