Eap Statistics - NETGEAR XS728T ProSAFE Software Administration Manual

• Tx Oversized. The total number of frames that exceeded the maximum permitted
frame size. This counter has a maximum increment rate of 815 counts per second at
10 Mb/s.
• Total Transmit Packets Discarded. The sum of single collision frames discarded,
multiple collision frames discarded, and excessive frames discarded.
• Single Collision Frames.The number of successfully transmitted frames on a
particular interface for which transmission is inhibited by exactly one collision.
• Multiple Collision Frames. The number of successfully transmitted frames on a
particular interface for which transmission is inhibited by more than one collision.
• Excessive Collision Frames. The number of frames for which transmission on a
particular interface fails due to excessive collisions.
• 802.3x Pause Frames Transmitted. The number of MAC control frames transmitted
on this interface with an operation code indicating the pause operation. This counter
does not increment when the interface is operating in half-duplex mode.
• EAPOL Frames Received. The number of valid EAPOL frames of any type received
by this authenticator.
• EAPOL Frames Transmitted. The number of EAPOL frames of any type transmitted
by this authenticator.
Use the buttons at the top of the screen to perform the following actions:
• Click Clear to clear all the counters. This resets all statistics for this port to 0.
• Click Update to display the most current statistics.

EAP Statistics

Use the EAP Statistics screen to display information about EAP packets received on a
specific port.
To display a EAP Statistic:

1. Select Monitoring > Ports > EAP Statistics.
2. Select the interface for which data is to be displayed.
This can be done by either clicking the check box by the required port or by entering the
port name in the Go to Interface field and clicking Go.
The following table describes the EAPOL and EAP statistics displayed.
• Frames Received. The number of valid EAPOL frames received on the port.
• Frames Transmitted. The number of EAPOL frames transmitted through the port.
• Start Frames Received. The number of EAPOL start frames received on the port.
• Logoff Frames Received. The number of EAPOL log-off frames that have been
received on the port.
• Last Frame Version. The protocol version number attached to the most recently
received EAPOL frame.
XS728T ProSAFE 28-Port 10-Gigabit L2+ Smart Switch
Monitoring
155