Mst Port Configuration - NETGEAR XS728T ProSAFE Software Administration Manual

Configuration changes take place immediately.
To modify an MST instance:

1. Select the check box next to the instance to configure and update the values.
You can select multiple check boxes to apply the same setting to all selected MTS
instances.
2. Click Apply to send the updated configuration to the switch.
Configuration changes take place immediately.
To delete an MST instance, select the check box next to the instance and click Delete.
The following table describes the information displayed on the screen for each configured
MST instance..
Field Description
Bridge Identifier The bridge identifier for the selected MST instance. It is made up using the bridge priority
and the base MAC address of the bridge.
Time Since Displays the total amount of time since the topology of the selected MST instance last
Topology changed. The time is displayed in hour/minute/second format, for example, 5 hours, 10
Change minutes, and 4 seconds.
Topology Displays the total number of times topology has changed for the selected MST instance.
Change Count
Topology Indicates whether a topology change is in progress on any port assigned to the selected
Change MST instance. The possible values are True and False.
Designated Root Displays the bridge identifier of the root bridge for the selected MST instance, which is
made up from the bridge priority and the base MAC address of the bridge.
Root Path Cost Displays the path cost to the designated root for this MST instance.
Root Port Indicates the port to access the designated root for this MST instance.

MST Port Configuration

Use the MST Port Configuration screen to configure and display Multiple Spanning Tree
(MST) settings on a specific port on the switch.
To configure MST port settings:

1. Select Switching > STP > Advanced > MST Port Configuration.
Note: To restart the STP migration process (force re-negotiation with
neighboring switches on selected interfaces) select one or more
interface(s) and press the Activate Protocol Migration button.
XS728T ProSAFE 28-Port 10-Gigabit L2+ Smart Switch
Switching
65