Ip Binding Table - NETGEAR XS728T ProSAFE Software Administration Manual

To configure IP ACL interface bindings:

1. Select Security > ACL > Advanced > IP Binding Configuration.
2. Select an existing IP ACL from the ACL ID menu.
The packet filtering Direction for ACL is Inbound, which means the IP ACL rules are
applied to traffic entering the port.
3. Specify a Sequence Number to indicate the order of this access list relative to other access
lists already assigned to this interface and direction.
A low number indicates high precedence order. If a sequence number is already in use
for this interface and direction, the specified access list replaces the currently attached
access list using that sequence number. If you do not specify the sequence number, a
sequence number that is one greater than the highest sequence number currently in use
for this interface and direction is used. The valid range is 1–2147483647.
4. Click the appropriate bar to display the available ports or LAGs.
• To add the selected ACL to a port or LAG, click the box directly below the port or LAG
number so that an
• To remove the selected ACL from a port or LAG, click the box directly below the port
or LAG number to clear the selection. An
applied to the interface.
5. Click Apply to save any changes to the running configuration.

IP Binding Table

Use the IP Binding Table screen to view or delete the IP ACL bindings.
To display the IP Binding Table:

Click Security > ACL > Advanced > IP Binding Table.
The following table describes the information displayed in the IP Binding Table..
Field
Interface
Direction
ACL Type
ACL ID
Sequence Number
XS728T ProSAFE 28-Port 10-Gigabit L2+ Smart Switch
?
appears in the box.
Description
The interface to which the IP ACL is bound.
The packet filtering direction for ACL. The only valid direction is Inbound,
which means the IP ACL rules are applied to traffic entering the port.
The type of ACL assigned to the selected interface and direction. IP and
IPv6 appear together.
Displays the ACL number identifying the ACL assigned to the selected
interface and direction.
Displays the sequence number signifying the order of the specified ACL
relative to other ACLs assigned to the selected interface and direction.
Security
?
in the box indicates that the ACL is
147