Vlan Routing Wizard - NETGEAR XS728T ProSAFE Software Administration Manual

28-port 10-gigabit l2+ smart switch
Hide thumbs Also See for XS728T ProSAFE:
Table of Contents

Advertisement

VLAN Routing Wizard

VLAN Routing
VLAN Routing Wizard
The VLAN Routing Wizard allows you to create a VLAN routing interface, configure the IP
address and subnet mask for the interface, and add selected ports or LAGs to the VLAN.
With this wizard, you can:
Create a VLAN.
Add selected ports to the newly created VLAN and remove selected ports from the default
VLAN.
Add selected LAGs to the newly created VLAN.
Enable tagging on selected ports if the port is in another VLAN. Disable tagging if a
selected port does not exist in another VLAN.
Exclude ports not selected from the VLAN.
Enable routing on the VLAN using the IP address and subnet mask entered.
To configure VLAN settings:
1.
Select Routing > VLAN > VLAN Routing Wizard.
2.
In the VLAN ID field specify a VLAN ID.
This VLAN identifier (VID) associated with this VLAN is created if it does not exist. The
valid range is 1–4093.
3.
In the IP Address field, specify the IP address of the VLAN interface.
4.
In the Network Mask field, specify the subnet mask of the VLAN interface.
5.
Select the operation mode for ports and LAGs.
The Port and LAG blocks each display selectable physical ports and LAGs (if any).
Selected interfaces are added to the routing VLAN. Each interface can be configured to
operate in one of three modes:
T (Tagged). Select the interfaces on which all frames transmitted for this VLAN are
tagged. The interfaces that are selected are included in the VLAN.
U (Untagged). Select the interfaces on which all frames transmitted for this VLAN are
untagged. The interfaces that are selected are included in the VLAN.
Blank (Autodetect). Select the interfaces that might be dynamically registered in this
VLAN using GVRP. This selection has the effect of excluding an interface from the
selected VLAN.
6.
Click Apply to send the updated configuration to the switch.
Configuration changes take place immediately.
XS728T ProSAFE 28-Port 10-Gigabit L2+ Smart Switch
Routing
88

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents