View Eap Statistics - NETGEAR GS724TPv2 User Manual

NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2
Table 54. Detailed port statistics (continued)
Field
Multiple Collision Frames
Excessive Collision Frames
STP BPDUs Received
STP BPDUs Transmitted
RSTP BPDUs Received
RSTP BPDUs Transmitted
MSTP BPDUs Received
MSTP BPDUs Transmitted
802.3x Pause Frames
Transmitted
EAPOL Frames Received
EAPOL Frames Transmitted
Time Since Counters Last
Cleared

View EAP Statistics

You can display information about the incoming EAP packets.

To view EAP statistics and clear the statistics:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 9.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
Description
A count of the number of successfully transmitted frames on a particular
interface for which transmission is inhibited by more than one collision.
A count of frames for which transmission on a particular interface fails due to
excessive collisions.
Number of STP BPDUs received at the selected port.
Number of STP BPDUs transmitted from the selected port.
Number of RSTP BPDUs received at the selected port.
Number of RSTP BPDUs transmitted from the selected port.
Number of MSTP BPDUs received at the selected port.
Number of MSTP BPDUs transmitted from the selected port.
A count of MAC control frames transmitted on this interface with an opcode
indicating the PAUSE operation. This counter does not increment when the
interface is operating in half-duplex mode.
The number of valid EAPoL frames of any type that were received by this
authenticator.
The number of EAPoL frames of any type that were transmitted by this
authenticator.
The elapsed time in days, hours, minutes, and seconds since the statistics for
this port were last cleared.
Monitor the System
260
Change the Default IP Address of the