View Or Clear Eap And Eapol Statistics - NETGEAR S350 Series User Manual

S350 Series 24-Port (PoE+) and 48-Port Gigabit Ethernet Smart Managed Pro Switches
Table 67. Detailed port statistics (continued)
Field
EAPOL Frames Transmitted
Time Since Counters Last
Cleared

View or Clear EAP and EAPoL Statistics

You can view information about Extensible Authentication Protocol (EAP) and EAP over LAN
(EAPoL) packets that are received on physical ports.
To view or clear EAP and EAPoL statistics:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Discover or Change the Switch IP
Address on page 12.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Monitoring > Ports > EAP Statistics.
The previous figure does not show all fields on the EAP Statistics page.
6. To refresh the page with the latest information about the switch, click the Refresh button.
7. To clear the counters, which resets the EAP and EAPoL statistics to default values, take
one of the following actions:
• To clear the counters for a specific port, select the check box associated with the port,
and click the Clear button.
Monitor the System
Description
The number of EAPoL frames of any type that were transmitted by this
authenticator.
The elapsed time in days, hours, minutes, and seconds since the statistics for
the port were last cleared.
306 User Manual