View Eap Statistics - NETGEAR M7100 Series User Manual

Table 239. Port Detailed Statistics (continued)
Field
EAPOL Frames Received
EAPOL Frames Transmitted
Time Since Counters Last
Cleared

View EAP Statistics

You can display information about EAP packets received on a specific port.

To view EAP statistics:
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
1.
example, 169.254.100.201.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
2.
the switch.
Launch a web browser.
3.
Enter the IP address of the switch in the web browser address field.
4.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
Enter the user name and password.
5.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
6.
The web management interface menu displays.
Select Monitoring > Ports > EAP Statistics.
7.
Use the buttons at the bottom of the screen to perform the following actions:
To clear all the EAP counters for all ports on the switch, select the check box in the
•
row heading and click the Clear button. Clicking the button resets all statistics for all
ports to default values.
M6100, M5300, and M7100 Series Managed Switches
Description
The number of valid EAPOL frames of any type that were received by this
authenticator.
The number of EAPOL frames of any type that were transmitted by this
authenticator.
The elapsed time in days, hours, minutes, and seconds since the statistics
for this port were last cleared.
Monitor the System
685