Entering Values - Fuji Xerox DocuPrint CP215 Series User Manual

 Entering Values
Using the Operator Panel
Using the operator panel, enter the values that you found in the color registration chart to make
adjustments.
1
Press the (Menu) button.
2
Select Admin Menu, and then press the
3
Select Maintenance Mode, and then press the
4
Select Adjust ColorRegi, and then press the
5
Select Enter Number, and then press the
6
Confirm that Enter (Y, M, C) appears, and then press the
value (for example, +3) displayed on the chart.
7
Press the button once and move the cursor to the next color.
8
Repeat steps 6
9
Confirm that Enter (LY, LM, LC) appears.
10
Press the or
11
Press the button once and move the cursor to the next color.
12
Repeat steps 10
13
Confirm that Enter (RY, RM, RC) appears.
14
Press the or
15
Press the button once and move the cursor to the next color.
16
Repeat steps 14
The top screen appears.
17
Perform steps 1
18
Select Color Regi Chart, and then press the
The color registration chart is printed with the new values.
19
Adjust until all straight lines are at the value of 0. Viewing the images before and after will help.
200 Troubleshooting
and 7 to enter all of the digits, and then press the
button until you reach the value (for example, +3) displayed on the chart.
and 11 to enter all of the digits, and then press the
button until you reach the value (for example, +3) displayed on the chart.
and 15 to enter all of the digits, and then press the
to 4 to enter the Adjust ColorRegi menu.
button.
button.
button.
button.
or
button.
button until you reach the
button.
button.
button.