Packet Flow Explore; Chapter 43 Packet Flow Explore; Overview; What You Can Do In This Chapter - ZyXEL Communications UAG4100 User Manual

43.1 Overview

Use this to get a clear picture on how the UAG determines where to forward a packet and how to
change the source IP address of the packet according to your current settings. This function
provides you a summary of all your routing and SNAT settings and helps troubleshoot any related
problems.

43.1.1 What You Can Do in this Chapter

• Use the Routing Status screen (see
and each routing function's settings.
• Use the SNAT Status screen (see
address conversion (SNAT) flow and each SNAT function's settings.

43.2 The Routing Status Screen

The Routing Status screen allows you to view the current routing flow and quickly link to specific
routing settings. Click a function box in the Routing Flow section, the related routes (activated)
will display in the Routing Table section. To access this screen, click Maintenance > Packet
Flow Explore.
The order of the routing flow may vary depending on whether you:
• select use policy route to override direct route in the CONFIGURATION > Network >
Routing > Policy Route screen.
• use policy routes to control 1-1 NAT by using the policy control-virtual-server-rules
activate command.
Note: Once a packet matches the criteria of a routing rule, the UAG takes the
corresponding action and does not perform any further flow checking.
UAG4100 User's Guide
C
HAPTER

Packet Flow Explore

Section 43.2 on page 419) to view the overall routing flow
Section 43.3 on page 423) to view the overall source IP
4 3
419