Bluetooth Control Panel - Juniper Allegro 2 Owner's Manual

If the Bluetooth gadget is not on your Home screen, you
can get to the desired control panel by selecting Getting
Started and either Set up a Bluetooth device or Set up a
Bluetooth COM Port. You can also press Start > Settings >
Connections.
Note: If the Bluetooth radio is turned on and then the
handheld is suspended, wireless Bluetooth turns off to save
battery power. When the Allegro 2 resumes (turns on), the
radio turns on automatically.

Bluetooth Control Panel

To create a partnership with and connect to other Bluetooth
devices, such as headphones, keyboards, and modems,
follow these steps:
1. Tap-hold the Bluetooth icon to bring up the dialog box
shown below.
49
Chapter 4 Bluetooth Wireless Communication