Gps/Gnss; Camera - Juniper Allegro 3 Series Owner's Manual

To remove the SIM card, pull the tray open and remove
the card. Push the empty tray in until it catches.
5. Replace the battery pack, and attach the battery door.
6. Power on the Allegro 3.
7. You can now access the Internet. Open Internet Explorer
to test your setup.
To remove the SIM card, gently pull it out with tweezers or a
piece of tape.

GPS/GNSS

Allegro 3 Geo models provide position information using
an integrated GPS/GNSS receiver. Access the receiver by
selecting Settings > Location and turning it on. Settings can
be viewed and edited to suit your needs.

Camera

A 5MP camera is available for taking photos and videos.
Select the Camera app to manage features and use the
camera.
The camera and flash are located on the back of the Allegro
3. The flash can also be used as a flashlight.
If you have a Geo model, you can record the GNSS location
with photos and videos. Go to camera settings and turn
Save location on.
Chapter 3 Optional Features
17