Table of Contents
Advertisement
8. Service Mode
AB.TONER EMPTY REPORT
Functions/Use
• Select to generate a report to a specific destination when toner empty status
Setting/Procedure • The default setting is "OFF".
• If "ON" is selected, select generate report and send to remote side when toner
• Enter the telephone number for which the report is to be produced.
• Fax number specifications: An up-to-20-digit number that may consist of "0-9",
• The report will generate after 20 minutes, 24 hours, 48 hours, or 72 hours after
Toner empty report (example)
NAME:ABC 123
TEL:1234567
DATE:APR.01.2005 15:12
The Fax's following conditions were appears, the machine may be can not work correctly, the Fax already send a
report to your dealer automatically. They will contact with you soon.
Toner status
AC.IU LIFE REPORT
Functions/Use
• Select to generate the report when IU LIFE COUNTER becomes out of life.
Setting/Procedure • The default setting is "OFF".
AD.MAINTENANCE REPORT
Functions/Use
• Select error correction mode.
Setting/Procedure • The default setting is "ON".
68
occurs in the engine.
"OFF" : Not to generate report.
ON
: Generate a report to report destination.
runs out.
"*", "#", "pause", and "space". (0-9, #, *, pause, _)
the event has occurred or until the condition is gone.
SERVICE REPORT
: Empty
ON
: Generate a report to destination.
"OFF" : Not to generate a report.
"ON"
: When an error occurs during communication, re-send the frame
where the error occurs.
OFF
: Any error is ignored during communication.
Field Service Ver. 1.0 Apr. 2005
Advertisement
Table of Contents
