Table of Contents
Advertisement
7. Utility Mode
H. SMALL ORIGINAL
Functions/Use
• To set whether to enable or disable copying when an original of a size smaller
Setting/Procedure • The default setting is "OFF".
7.3.6
COPY SETTING 2
• COPY SETTING 2 is used to set the default values for different copy functions.
A. MIXED ORIGINAL
Functions/Use
• To set whether or not to select the Mixed Original mode when the Power Switch
Setting/Procedure • The default setting is "OFF".
B. COPY PRIORITY
Functions/Use
• To set the priority mode, either Auto Paper, Auto Size, or Manual, selected when
Setting/Procedure • The default setting is "APS".
C. OUTPUT PRIORITY
Functions/Use
• To set the priority finishing function, either Non-Sort, Sort, or Group.
Setting/Procedure • The default setting is "NON".
D. 4IN1 COPY ORDER
Functions/Use
• To set the layout of copy images in 4in1 copies.
Setting/Procedure • The default setting is "PATTERN1".
E. CRISSCROSS MODE
Functions/Use
• To set whether or not to select the Mixed Original mode when the Power Switch
Setting/Procedure • The default setting is "ON".
38
than the detectable one is loaded in the Auto Paper mode.
ON
"OFF"
is turned ON or Panel Reset key is pressed.
ON
"OFF"
the Power Switch is turned ON or Panel Reset key is pressed.
"APS"
AS
MANUAL
"NON"
SORT
"PATTERN1"
is turned ON or Panel Reset key is pressed.
"ON"
OFF
Field Service Ver. 1.0 Apr. 2005
GROUP
PATTERN2
4035S501AA
4035S502AA
Advertisement
Table of Contents
