Table of Contents
Advertisement
Field Service Ver. 1.0 Apr. 2005
C. MEMORY CLEAR
Functions/Use
• To clear the setting values listed on the lower, resetting them to the default val-
Setting/Procedure • Settings of the Utility mode
• Settings of Service's Choice of the Service mode
• Settings of Adjust of the Service mode
• Setting of Administrator Number Registration of the Service mode
• Settings of Fixed Zoom Change of the Service mode
• Settings of Security of the Service mode
• Settings of copy programs
NOTE
• After Memory Clear has been executed, be sure to turn OFF and ON the
D. PM COUNTER
• To clear each of the counts of the PM Counter.
E. MAINTENANCE COUNTER
• To clear the count of the Maintenance Counter.
F. SUPPLIES LIFE COUNT.
• To clear the count of the Supplies Life Counter.
G. APPLICATION COUNTER
• To clear each of the counts of the Application Counter.
H. SCAN COUNTER
• To clear the count of the Scan Counter.
I.
PAPER SIZE COUNTER
• To clear each of the counts of the Paper Size Counter.
J. MISFEED COUNTER
• To clear each of the counts of the Misfeed Counter.
K. TROUBLE COUNTER
• To clear each of the counts of the Trouble Counter.
L. ADF BACKUP CLEAR
☞ For details, see DF-605 Service Manual
Functions
• To clear the values adjusted with ADF SENSOR ADJUST and the values
Use
• When PBA-CONT board has been replaced.
• When PBA-VR board has been replaced.
ues.
Power Switch.
adjusted with Org. Width Detect.
8. Service Mode
97
Advertisement
Table of Contents
