Table of Contents
Advertisement
7. Utility Mode
D. PROGRAM DIAL
Functions/Use
• This function can be used to program one-touch dial keys (No. 12 to 15) with fax
Setting/Procedure • If one-touch dial keys have been programmed with fax numbers and a transmis-
• The function of registration
E. BATCH TX
Functions/Use
• This function can be used to specify the batch transmission setting (transmission
Setting/Procedure • If the batch transmission setting (transmission time) is specified for a one-touch
• A one-touch dial key must first be programmed with the fax number of the recipi-
• Cannot set for e-mail address.
F. MAILBOX
Functions/Use
• This function can be used to specify mailbox IDs in order to receive faxes with
Setting/Procedure • Mailbox IDs must first be specified in order to receive faxes with mailbox recep-
• A mailbox ID cannot be the same as a relay box ID.
• Setting value : 0000 to 9999
• Password
40
numbers and a transmission/reception function (such as timer transmission or
polling reception), allowing that function to be carried out by pressing just the
corresponding one-touch dial key.
sion/reception function, that function can be carried out by pressing just the cor-
responding one-touch dial key.
Function No.
1
BROADCAST
2
TIMER TX
3
MAIBOX TX
6
POLLING RX
7
RELEY INITIATE
time) for a one-touch dial key programmed with recipient fax numbers, so multi-
ple documents can be stored in the memory and sent out together at the speci-
fied time.
dial key programmed with recipient fax numbers, multiple documents can be
stored in the memory and sent out together at the specified time.
ent for the batch transmission.
mailbox reception only if the mailbox ID sent by the caller matches the mailbox
ID set on this machine.
tion only if the mailbox ID sent by the caller matches the mailbox ID set on this
machine.
: Setting range 0 to 9999, or none.
Field Service Ver. 1.0 Apr. 2005
Function
Description
Up to 50 detection
Up to 50 detection
-
-
-
Advertisement
Table of Contents
