Table of Contents
Advertisement
Field Service Ver. 1.0 Apr. 2005
C. MAINTENANCE COUNTER
Functions/Use
• To enter an appropriate counter value (0 to 999999) as the tentative mainte-
• Specify the setting on maintenance counter to "1" or "2": If the maintenance life
Setting/Procedure • The default setting is "0".
• When "1" or "2" is selected, a screen will then appear to allow the counter value
NOTE
• The counter value is decremented until it reaches -999999 even after it has
D. IU LIFE STOP MODE
Functions
• When the Supplies Life Count. reaches the life value, the IU life will be detected.
Use
• The mode when the IU life is reached, is specified by this setting.
Setting/Procedure • The default setting is "CONTINUOUS."
NOTE
• The counter value is decremented until it reaches -999999 even after it has
E. ID ADJUST
Functions
• To set the image density by varying Vg and Vb on the engine side.
Use
• Used when the image density is high or low.
Setting/Procedure • The default setting is "0".
F. VG ADJUST
Functions
• To adjust image density by varying Vg with changing sensitivities as the PC
Use
• When image problems (fog, void) occur
• When the PC Drum Unit has been replaced
Adjustment
To reduce the margin........eliminate void.
Instruction
To increase the margin.....eliminate fog.
Setting/Procedure • The default setting is "0".
nance time.
is reached, the maintenance call (M1) or Tech. Rep. call [Call Service (M1)] will
appear.To select the display of the fixed zoom ratios and paper sizes according
to the applicable marketing area.
"0" : Not counted
1
: Counted (The maintenance call display is given when the counter
reaches 0.)
2
: Counted (The Tech. Rep. call display is given and the initiation of
any new copy cycle is inhibited when the counter reaches 0.)
to be entered.
counted 0.
"CONTINUOUS" : Enables copying. Maintenance call display is given.
STOP
: Disables copying. Tech. Rep. call display is given and
counted 0. In this case, however, no image quality is guaranteed.
"0"
Setting range : -3 to +3
Drum is used for an extended period of time.
"0"
Setting range : -2 to +2
the initiation of any new copy cycle is inhibited.
8. Service Mode
59
Advertisement
Table of Contents
