Table of Contents
Advertisement
8. Service Mode
H. CCD MOVE TO HOME
Functions
• To move the Scanner to its home position and fix it at the home position.
Use
• When transporting the machine
Setting/Procedure • Pressing the Start key will move the Scanner toward the left from its standby
<Step>
1. Press the Start key to move the Scanner from the standby position to the home
2. Pressing the Stop key will bring the Scanner back to its original position.
I.
UPLOAD FIRMWARE
Functions/Use
• Download firmware from this machine to remote side, after setup of remote side
Setting/Procedure • Machine will dial automatically and copy the Flash ROM date to remote side
J. FAX RES. COPY TEST
Functions
• Fax resolution copy test
Use
• To check whether the encoding/ decoding process is correct
Setting/Procedure • The paper source is fixed to Tray1(MP).(Tray cannot be changed.)
• When A4 or Letter is not loaded in Tray1, operation of printing is not performed.
NOTE
• If an error is displayed during the test, execute "SERVICE MODE/CLEAR
K. SCAN TEST
Functions
• To check that the Exposure Lamp turns ON properly and the Scanner moves
Use
• When the scan motion is faulty
Setting/Procedure 1. Press the Start key to begin the scanner test.
2. Press the Stop key to stop the scanner test.
L. ADF WIDTH ADJ. (MAX)
☞ For details, see DF-605 Service Manual
Functions
• To adjust the Original size detection VR.
Use
• When PBA-VR board is replace
• When PBA-CONT board is replace
M. ADF WIDTH ADJ. (MIN)
☞ For details, see DF-605 Service Manual
Functions
• To adjust the Original size detection VR.
Use
• When the scan motion is faulty
• When PBA-CONT board is replace
84
position.
position.
location.
machine.
DATA/DRAM CLEAR."
properly.
Field Service Ver. 1.0 Apr. 2005
Advertisement
Table of Contents
