Table of Contents
Advertisement
7. Utility Mode
B. USER FAX No.
Functions/Use
• User fax number is set to TSI (Transmitting Station Identification), CSI (Called
Setting/Procedure • Max. 20 digits.
• The characters which can be inputted are "numbers from 0 to 9", "Space", "+"
C. USER NAME
Functions/Use
• The User Name is used for the indication of destination station at the time of the
Setting/Procedure • Maximum 32 digits character can be inputted.
52
Subscriber Identification) during communication. A symbol is printed on header
and Status list, but only figure is set to TSI, CSI signal. This is checked with the
communication permission ID registered at destination station in case of Closed
network.
and "-".
communication between same models.
Field Service Ver. 1.0 Apr. 2005
Advertisement
Table of Contents
