Field Service Ver. 1.0 Apr. 2005
3.2
Disassembly/Assembly procedure
3.2.1
FAX Board and NCU Boards
1. Remove the Rear Cover. (9 screws)
2. Disconnect the speaker and battery
connectors from the Fax Board.
4508D503AA
3. Remove the ground terminal of the
NCU Board from the rear frame. (1
screw)
4398U013AA
4. Remove the NCU Board. (4 screws)
4398U012AB
5. Remove the Fax Board. (4 screws)
4398U009AA
6. Disconnect the Fax Board from the
hookup connector of the machine
Control Board (PWB-C/C).
4508D504AA
3. Other
13