Table of Contents
Advertisement
7. Utility Mode
<ACCESS NO. REG.?>
Functions/Use
• To register a 3-digit (001 to 999) access number used for the copy track function,
Setting/Procedure <Registration Procedure>
1. Type any access number from the 10-Key Pad.
2. Press the [Yes] key to validate the entry of the access number.
3. To continue registering access numbers, repeat steps 1 and 2. (Up to 20 differ-
4. When the registration procedure is completed, quit the function by pressing the
<Change/Delete Procedure>
1. Type the access number to be changed or deleted from the 10-Key Pad and
2. When you are prompted to determine whether to retain the data or not, press
3. Select "EDIT" or "DELETE" and press the [Yes] key.
✽
4. Type the new access number from the 10-Key Pad and press the [Yes] key.
5. To continue changing or deleting new access numbers, repeat steps 1 to 4.
6. When the EDIT/DELETE procedure is completed, quit the function by pressing
<COPY TRACK DATA?>
Functions/Use
• To display or clear the total count value of a specific account.
• To clear the total count values of all accounts under control.
Setting/Procedure <Display/Clear Procedure>
1. Select "DISPLAY" and press the [Yes] key.
2. Select the access number, for which the count is to be checked, and press the
3. The total count value of the access number selected will be displayed.
✽
✽
4. Press the [No] key to clear the count value.
5. When the count value has been cleared, quit the function by pressing the [Yes]
<All Clear Procedure>
1. Select "CLEAR" and press the [Yes] key.
2. When you are prompted to confirm if all count values are to be cleared, press
34
or to change or delete a previously set access number.
ent accounts can be set.)
[No] key.
press the [Yes] key.
the [No] key.
If "EDIT" is selected, a screen appears allowing you to change the access num-
ber. (To step 4)
If "DELETE" is selected, the current access number is deleted.
the [No] key.
[Yes] key.
To clear the count value, press the [No] key. (To step 4)
To quit the function without clearing the count value, press the [Yes] key.
key.
the [Yes] key.
Field Service Ver. 1.0 Apr. 2005
Advertisement
Table of Contents
