Security; Security Function Setting Procedure; Procedure; Exiting - Konica Minolta FK-505 Service Manual

9. Security

9. Security
9.1

Security Function Setting Procedure

• Security is used to set the security functions.
9.1.1

Procedure

1. Display the Service mode screen.
2. Press the Stop key, then the 9 key.
3. The Security mode screen appears.
9.1.2

Exiting

• Press the Panel Reset key.
A. TOTAL COUNTER COUNT
Functions/Use • To set the count-up method.
Setting/Procedure • The default setting is "0".
B. SIZE COUNTER COUNT
Functions/Use • To set the paper size to be counted.
Setting/Procedure • The default setting is "1".
C. PLUG-IN COUNTER COPY
Functions/Use • To select whether to enable or disable copying according to whether the Plug-in
Setting/Procedure • The default setting is "ENABLE".
D. MACHINE COUNTER
Functions/Use • To select whether to enable or disable copying according to whether the
Setting/Procedure • The default setting is "DISABLE".
Size Counter Count Mode
Total Counter Count Mode
Total Counter
Size Counter
1: 1 count 2: 2 counts
98
"0" : One count-up for each copy cycle (ordinary mode)
1 : Multiple count-up according to the paper size and copy mode.
2 : Multiple count-up according to the paper size and copy mode.
0 : Not counted
"1" : A3/LEDGER L
2 : A3/B4/LEDGER L/LEGAL L/8K L
3 : A3/B4/FLS/LEDGER L/LEGAL L/11 × 14 L/8K L
Counter is mounted or not.
"ENABLE" DISABLE
Machine Counter is mounted or not.
ENABLE "DISABLE"
<Count-up Table>
Size other than those set
0
Field Service Ver. 1.0 Apr. 2005
1 2
1
Not Count
Set size
0 1 2
1 2 2
1 1 2