Table of Contents
Advertisement
Field Service Ver. 1.0 Apr. 2005
F. DUPLEX COPY
• Appears only when the AD-504 (bizhub 180 / bizhub 210 only) is installed
Functions/Use
• To select whether to enable or disable 2-sided copying.
Setting/Procedure • This function should not be used.
7.3.7
FAX REGISTRATION
A. ONE-TOUCH DIAL
Functions/Use
• This function can be used to program one-touch dial keys with fax numbers,
Setting/Procedure • A maximum of 27 fax numbers can be programmed.
The contents of registration.
• Destination name : 20characters.
• Dial No.
• Sub address
• SID
• Modem speed
• Registered data : Automatically.
B. SPEED DIAL
Functions/Use
• This function can be used to program speed dial numbers with fax numbers,
Setting/Procedure • A maximum of 200 fax numbers (001 to 200) can be programmed.
The contents of registration.
• Destination name : 20characters.
• Dial No.
• Sub address
• SID
• Modem speed
• Registered data : Automatically.
C. GROUP DIAL
Functions/Use
• This function can be used to program a single one-touch dial key with a maxi-
Setting/Procedure The contents of registration.
• Group name : 20 characters.
• Information of destination station : The contents of one-touch or speed dial.
allowing the recipient to be specified easily and accurately without the need to
manually enter the number using the 10-Key Pad. This dialing method is conve-
nient for programming numbers where faxes are frequently sent to.
: 30 digits.
: 20 digits.
: 20 digits.
: 33.6 kbps/ 14.4kbps/ 9.6 kbps
allowing the recipient to be specified easily and accurately without the need to
manually enter the number using the 10-Key Pad.
: 30 digits.
: 20 digits.
: 20 digits.
: 33.6 kbps/ 14.4kbps/ 9.6 kbps
mum of 50 different fax numbers as one group. Programming a one-touch dial
key with a group of fax numbers is convenient when documents are frequently
sent to a set group of multiple recipients.
7. Utility Mode
39
Advertisement
Table of Contents
