1
4
1. Top cowling
2. Protrusion
3. Holder
4. Bottom cowling
1
2
3
4
1. Top cowling
2. Protrusion
3. Holder
4. Bottom cowling
5.
Push the cowling lock levers inward to
secure the top cowling.
1
1. Cowling lock lever
2
3
ZMU07756
2
3
ZMU07757
ZMU07758
1
1. Cowling lock lever
6.
Check the fitting of the top cowling by
pushing it with both hands. NOTICE: If
the top cowling is not installed cor-
rectly, water can enter the top cowling
and damage the engine, or the top
cowling can blow off at high speeds.
[ECM02371]
EMU46180
Checking power trim and tilt unit
EWM04270
WARNING
Never get under the lower unit while it is
tilted, even when the tilt support shaft is
installed or the tilt support lever is
locked. Severe injury could occur if the
outboard motor accidentally falls.
Body parts can be crushed between the
outboard motor and the clamp bracket
when the outboard motor is trimmed or
tilted.
Operation
1
ZMU07759
ZMU07760
55