Setting The Media - Citizen CL-E700 Series User Manual

Chapter 2 Printer Operation
Menu Setting Table (p.41)

Setting the Media

Media Sizes
The position of label and tag media is sensed by either a transparent
sensor or a reflective sensor.
Transparent sensor: Detects the gaps between label media and notches
of tag media
Reflective sensor: Detects the black mark
Label media
B
C
A
Label
H
Label
G
Label
Transparent sensor
A Label width
Liner width
B
C Label left edge position
E Length of gap between labels 2.54 (0.10)
F Label length
G Label pitch
Liner thickness
H
I Total media thickness
Position of right edge of
J
notch
Position of left edge of notch 0 (0)
K
L Notch length
Right edge of black mark
M
N Left edge of black mark
O Black mark width
* Use a transparent sensor for label media gaps and media with black marks.
* Use a transparent sensor for fan fold media.
* If the label pitch is 1 inch or less, set the Small Media Adjustment menu to ON
and match it to the label that uses the value of the Small Media Length menu.
* Use a carbon ink of OD value 1.5 or more for black mark.
25
Continuous media
Notch detection
I
L
M
I
J
Media direction
Min. value mm (inches) Max. value mm (inches)
19.50 (0.77) 118.00 (4.65)
19.50 (0.77) 118.00 (4.65)
0 (0) 2.54 (0.10)
2539.75 (99.99)
6.35 (0.25) 2539.75 (99.99)
6.35 (0.25) 2539.75 (99.99)
0.06 (0.0025) 0.125 (0.0049)
0.06 (0.0025) 0.25 (0.01)
3.60 (0.14) 60.80 (2.39)
57.20 (2.25)
2.54 (0.10) 17.80 (0.70)
15.00 (0.59) 66.50 (2.62)
0 (0) 51.5 (2.02)
3.18 (0.125) 17.80 (0.70)
Black mark detection
Printed area
Re ective sensor