Appendixes
Interfaces
Ethernet Interface
Support protocol
Network layer
Transport layer
Application layer
Raw Socket Port
Perform two-way communication of print data and printer status
Port No.
Port communication direction
Socket max. connections
Printable no. of connections
Timeout
HTTP Server
Settings of printer unit and network are done by LinkServer Web
Interface. For details, see "LinkServer Web Interface Configuration".
Port No.
Max. simultaneous connections
HTTP version
DHCP
IP address is automatically obtained from DHCP server within 60 seconds
after power is connected.
If the address cannot be obtained automatically, fixed IP address (default
value: 169.254.1.10) is applied.
SNMP Agent
By SNMP Agent function
SNMP version
Port No.
Supported MIB
Community name
76
ARP, IP, TCP
TCP, UDP
DHCP, HTTP, SNMP, Raw Socket Port
9100 (can be changed)
Two-way
8
1 (other sockets are reserved)
Default value: 60 sec
Can be set between 0 and 300.
No timeout when "0" is set.
80
4
HTTP/1.1
SNMPv2 (Trap function is not supported)
161
HOST-RESOURCES-MIB, Citizen-MIB(Private)
public