Citizen CL-E700 Series User Manual page 50

Chapter 2 Printer Operation
Mode Settings
[Zebra® Emulation]
Top Menu Sub Menu
Option RS-232C Baud
Interfaces
RS-232C Parity
RS-232C Length
RS-232C Stopbit
RS-232C X-ON
IEEE1284 *
Web Monitor *
Network Address ** –
Subnet Mask **
Gateway Address ** –
BOOTP **
DHCP **
WLAN Mode ***
WLAN Channel ***
WLAN SSID ***
* If the parallel board or multi-function LAN board is mounted.
** If the multi-function LAN board is mounted, or during web monitor function.
***When the multi-function wireless LAN board is available and when Web monitor is operating.
Note: Settings related to interface are enabled after restart or after power is connected again.
Default Menu
9600 115200
57600
38400
19200
9600
4800
2400
None None
Odd
Even
8 bits 8 bits
7 bits
1 bit 1 bit
2 bits
Yes Yes
No
On On
Off
Auto Auto
On
Off
000.000.000.000 to
255.255.255.255
– 000.000.000.000 to
255.255.255.255
000.000.000.000 to
255.255.255.255
– On
Off
– On
Off
– Auto
Ad-Hoc
Infrastructure
– 01 to 14
– Max. 32 characters
50
Remarks
Setting the baud rate of the serial interface.
• All settings related to the interface are
enabled after the power is reconnected.
Setting the communication parity for the
serial interface.
Setting the character length for the serial
interface.
Setting the stop bit for the serial interface.
Selectively setting the X-ON flow control of
the serial interface.
Setting both direction of the Centro
Interface.
Selecting the web monitor function.
Setting fixed IP address of the LAN board.
Setting fixed subnet mask value of the LAN
board.
Setting fixed default gateway address of
the LAN board.
Setting the BOOTP of the LAN board.
Setting the DHCP of the LAN board.
Wireless LAN mode setting.
Wireless LAN channel setting.
SSID setting of Wireless LAN.