Citizen CL-E700 Series User Manual page 47

Chapter 2 Printer Operation
Mode Settings
 For Zebra® Emulation
Top Menu Sub Menu
Page Setup Print Speed
Print Darkness
Darkness Adjust
[Darkness Adj]
Print Method
Continuous Media
Length
[Cont Media Len]
Vertical Position
[Vertical Pos]
Horizontal Position
[Horizontal Pos]
Vertical Image Shift
[Vertical Image]
Auto Side Shift
Media Sensor
Small Media
Adjustment
[Small Media Adj]
Small Media Length
[Small Media Len]
Symbol Set
System Setup Sensor Monitor
Sensor Level
Paper End Level
Error Reporting
[Error Report]
Buzzer Select
Metric/Inch
[Metric/Inch Sel]
Max Media Length
[Max Media Len]
Settings Lock
Default Menu
6 IPS 2 to 8 IPS
10 00 to 30
00 -10 to 10
TT TT
DT
4.00 inch 0.25 to 158.00 inch
101.6 mm 6.4 to 4013.2 mm
0.00 inch -1.00 to 1.00 inch
0.0 mm -25.4 to 25.4 mm
0.00 inch -1.00 to 1.00 inch
0.0 mm -25.4 to 25.4 mm
000 dots -120 to 120 dots
00 dot 00 to 15 dots
See Through See Through
Reflect
Non
Off On
Off
1.00 inch 0.25 to 1.00 inch
25.4 mm 6.4 to 25.4 mm
PM 50 symbols
– –
1.7V 0.0V to 3.3V
3.00V 0.01 to 3.30V
On Printing On Printing
Immediate
Exec/Err Exec/Err
All
Error
Key
None
Inch Inch
mm
10.00 inch 1.00 to 158.00 inch
254.0 mm 25. 4 to 4013.2 mm
Off On
Off
47
Remarks
Printing speed setting.
(7 or 8 IPS only in Direct Thermal mode.)
(2 to 6 IPS with optional peeler.)
Adjusting print darkness.
Fine adjustment of darkness commands.
Selecting thermal transfer (ribbon) /direct
thermal media.
Setting media length of continuous media.
Lower level = during mm mode.
Adjusting printing start position.
Adjusting horizontal image position.
Adjust the off set value in vertical when
mapping data on a RAM.
Allows horizontal shifting of printing position
by specified number of dots per page.
Effective when load is applied to a specific
head area, like vertical lines.
Selecting media sensor.
Setting for small media
Setting media length for small media.
Setting symbol set.
Displays level of sensor that is currently selected.
Selects threshold of the sensor.
Sets the paper end level.
Setting for error report.
Setting buzzer sounding conditions.
Sets the units.
Sets the maximum media length.
Prevents a command changing the set
value.