Emulation Auto Detect: Cross-Emulation - Citizen CL-E700 Series User Manual

Chapter 2 Printer Operation
Menu Setting Table (p.41)

Emulation Auto Detect: Cross-Emulation

Ordinarily emulation switching is conducted in the Menu Setup mode.
However, switching can also be conducted using the Emulation Auto-
Detection function outlined below.
The following message is displayed on the LCD when the Zebra®
emulation (ZPI2) command is detected during Datamax® emulation.
By selecting "Yes" the printer will reboot and automatically switch to ZPI2
emulation. The printer will return to the Ready status if "No" is selected.
The following message is displayed in the LCD when the Datamax®
command is detected during Zebra® emulation.
By selecting "Yes" the printer will reboot and automatically switch to
Datamax® emulation (DM4/DMI/DPP). The printer will return to the Ready
status if "No" is selected.
53
ZPI2 detected.
No Yes
Switch
No Yes
emulation?
No Yes
DMX detected.
No Yes
Switch
No Yes
emulation?
No Yes
TM